User's Manual

XXXXXXXX Rev X
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc. Page 5 of 13
Confidential Material – Disclosure Strictly Prohibited.
11 2462 USA, Canada, EU, Japan
12 2467 EU, Japan
13 2472 EU, Japan
14 2484 Japan
Table 1. IEEE 802.11g Channels
2.1.4 Electrical Interface
The electrical interface for LA-5127 is PC16. The chipset used supports this
interface; therefore no external component is required. The host must support the
PC16 interface as well. The card uses only the 16-bit interface.
3. WinCE Software Support
Driver support for the 5127 radio is available for Windows CE Embedded 5.0.
3.1 WinCE Card Configuration:
Device configuration is made using a built-in Microsoft OS WLAN configuration
service (i.e. a utility) commonly known as Wireless Zero Configuration (WCZ).
WZC allows a wireless device to connect to an existing wireless network, change
wireless network connection settings, configure a new wireless network
connection, and specify preferred wireless networks. WZC will also notify the
user when new wireless networks are available. Once a desired wireless
network is selected, WZC will automatically configure the wireless card to match
the setting of the network and will attempt a network connection.