User's Manual

XXXXXXXX Rev X
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc. Page 10 of 13
Confidential Material – Disclosure Strictly Prohibited.
If the final product used in a manner where the antenna is closer than 20cm from
the user (portable use), the OEM is integrator is responsible for re-evaluating the
end product and obtaining a separate FCC authorization.
Symbol recommends the use of an accredited Laboratory to carry out the
necessary tasks.
3. Available Channels
For use in the USA the OEM must limit the available channels from Ch.1 - 11
4.7 Statements required for the User Guide
The following statements are required in the final product user guide.
Many on the statements are dependent on the application of the final product.
Symbol recommends that the OEM seeks the advice from an accredited test
laboratory.
4.7.1 General Statements
Any changes or modifications not expressly approved by <xxx> , could void the
user’s authority to operate the equipment.
4.7.2 FCC Statements
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for
this transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
To comply with FCC RF exposure requirements, this device must be operated in
the hand with a minimum separation distance of 20 cm or more from a person’s
body. Other operating configurations should be avoided.