LA-5127 Integration Guide USA – FCC 15th Feb 2007 LA-5127 User Guide -FCC Copyright 2006 Symbol Technologies, Inc.
XXXXXXXXXX Rev X Table of Contents 1. 2. INTRODUCTION 1.1 BACKGROUND 3 1.2 PART NUMBERS 3 1.3 KEY FEATURES AND STANDARDS SUPPORTED 3 1.4 USER PROFILES 4 HARDWARE 2.1 4 4 4 4 5 5 WINCE CARD CONFIGURATION: REGULATORY 5 6 4.1 FINAL PRODUCT COMPLIANCE 6 4.2 REGULATORY STANDARDS 7 4.3 REGULATORY APPROVALS 7 4.3.1 USA Release 7 4.4 REFERENCE ANTENNA (APPLICABLE TO CONNECTOR VERSION CARD) 7 4.5 RADIO CARD REGULATORY MARKINGS 9 4.6 NATIONAL COUNTRY REQUIREMENTS 9 4.6.1 4.
XXXXXXXX Rev X 1. Introduction 1.1 Background LA-5127 is the next generation CF client card for embedded solutions and is intended for OEM customers. 1.2 Part Numbers LA-5127 CF card will come in one SKU: Part Number LA-5127-1002 SKU External Antenna Version 1.3 Key Features and Standards supported LA-5127 CF Card supports all required modes of operation as an 802.11g Mobile Unit (MU). In 802.
XXXXXXXX Rev X 1.4 User Profiles • The LA-5127 product is optimized for embedded, mobile enterprise and industrial applications where security, feature and technical service are required. • Mobile workers in healthcare, education, retail, manufacturing, hospitality and other industries with 802.11b, and 802.11g wireless LAN access. • Corporate Symbol device users with Wi-Fi wireless LAN access at the office, or with a subscription to a public wireless LAN. 2. Hardware 2.1 Hardware Environment 2.1.
XXXXXXXX Rev X 11 12 13 14 2462 2467 2472 2484 USA, Canada, EU, Japan EU, Japan EU, Japan Japan Table 1. IEEE 802.11g Channels 2.1.4 Electrical Interface The electrical interface for LA-5127 is PC16. The chipset used supports this interface; therefore no external component is required. The host must support the PC16 interface as well. The card uses only the 16-bit interface. 3. WinCE Software Support Driver support for the 5127 radio is available for Windows CE Embedded 5.0. 3.
XXXXXXXX Rev X 4. Regulatory Legal Disclaimer: This Guide may contain information on regulatory matters. The information should be used with the understanding that Symbol is not engaged in rendering any legal, regulatory or other professional opinion. Each country has specific laws and regulations governing the use of radio communications. Please consult the official code for each country of interest.
XXXXXXXX Rev X AS THE INTEGRATOR, YOU ARE RESPONSIBLE TO DETERMINE WHAT ADDITIONAL SPECIFIC REGULATORY REQUIREMENTS ARE REQUIRED OF THE COUNTRY IN WHICH YOUR PRODUCT WILL BE MARKETED. FINAL PRODUCT MAY REQUIRE NON-RADIO FREQUENCY APPROVALS SUCH AS PRODUCT SAFETY, EMC, AND SAR. 4.2 Regulatory Standards LA-5127 has been approved to comply with the standards listed below Electrical Safety: Certified to UL / cUL 60950-1, IEC / EN60950-1 RF USA: FCC Part 15.247, 15.
XXXXXXXX Rev X Antenna Type: Dipole Antenna Characteristics: Adapter cable: FREQUENCY: 2400-2500MHz CABLE LOSS: 0.9dB OVERALL GAIN: (3dBi-0.9dB) = 2.1dB LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X 4.5 Radio Card Regulatory Markings Regulatory markings are applied to the device signifying the radio (s) is approved for use in the following countries: United States 4.6 National Country Requirements NOTE: The sections below assume that the conditions detailed in section 4.1 are met. 4.6.1 United States of America The radio card is already approved under the requirements of the FCC.
XXXXXXXX Rev X If the final product used in a manner where the antenna is closer than 20cm from the user (portable use), the OEM is integrator is responsible for re-evaluating the end product and obtaining a separate FCC authorization. Symbol recommends the use of an accredited Laboratory to carry out the necessary tasks. 3. Available Channels For use in the USA the OEM must limit the available channels from Ch.1 - 11 4.
XXXXXXXX Rev X Remote and Standalone Antenna Configurations To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Radio Frequency Interference Requirements – FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
XXXXXXXX Rev X 5. Appendix 2: Product Mechanical Interface Drawing The following drawings show the Product physical size and shape, LED indicator and connector locations and pin assignments. PRELIMINARY USE ONLY LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
XXXXXXXX Rev X LA-5127 CF card Integration Guide Copyright 2004 Symbol Technologies, Inc. Confidential Material – Disclosure Strictly Prohibited.
