User's Manual

18 Wireless Networker LA-5030 PC Card & LA-5033 PCI Adapter User Guide
6. Remove the retaining screw and bracket for the slot.
7. Align the adapter with the slot and insert firmly. Verify the adapter
seats in the slot evenly.
8. Verify the antenna connectors on the back of the PC are exposed.
9. Secure the adapter to the chassis with a retaining screw.
10. Replace the computer cover.
11. Power on the desktop computer.
12. Go to the location on the system where the files reside and select the
Driver Only Installer.exe application from the top-level folder.
The Symbol Technologies, Inc. Driver Only Installer dialog displays.
Click Next to continue.
The driver only installer window displays stating the driver files are in
the process of being transferred.
The Windows XP Found New Hardware wizard displays.
13. When prompted for an installation method, select the Install the
software automatically (Recommended) checkbox.
Click Next.
14. Click Finish when prompted.
The Driver Only Installer displays stating the installation is completed.
Click OK.
15. Use the Windows Zero Config tool as required to connect to a
network and configure the Symbol WLAN adapter. Consult the
system administrator for information on configuring the access point
and associated Symbol adapter for EAP security support.