User's Manual

Wireless Networker LA-5030 PC Card & LA-5033 PCI Adapter User Guide 17
Refer to Appendix A for instructions on using the Configuration Utility.
3.4 Installing the LA-5033 PCI Adapter
and Driver for use with Windows XP
Zero Config
Windows XP PCI driver only installations require the physical installation
of the PCI adapter and the installation nof the device driver.
Use the Windows XP Zero Config utility as the adapter management tool
if using the Symbol PCI adapter without the Symbol Configuratiuon Utility
or if using a 3
rd
party software supplicant. The Symbol Configuration
Utility does not function properly while 3
rd
party software supplicants are
loaded on the system.
Note: A Hardware or Software Installation dialog box could display
during the driver installation stating the software and Symbol PCI
adapter have not passed Windows Logo testing to verify
compatibility with Windows XP. Click Continue Anyway. If
STOP Installation is clicked, restart the installation.
To update the driver without the Symbol Configuration Utility in Windows
XP:
1. Verify Windows XP SP1 is installed to use the latest Symbol driver in
Windows XP and ensure the latest feature set is available.
2. If downloading the driver files from the Symbol Web site
(http://www.symbol.com/services/downloads), extract the files to the
computer.
3. Power off the computer before installing the adapter.
4. Remove the computer cover.
5. Locate an available PCI slot in the computer.