User's Manual

Windows NT Network Configuration Parameters
B 2 Spectrum24 Wireless LAN Adapter Product Reference Guide
Power Mode selects Continuously
Aware Mode (CAM)
or Power Saving
Protocol (PSP) mode.
Range: CAM, PSP
Default: CAM
Parameters
For MicroAP
Description Range and
Default
802.11 Beacon
Delay
frequency hops
between broadcast
DTIM transmissions
(MicroAP only).
Range: 1 - 10
Default: 1
802.11 Hop
Sequence
frequency hopping
sequence selection
(MicroAP only).
Range: 1 - 79,
255 = auto-select
Default: 255 -
auto-select
802.11Hop
Set
frequency hopping
set selection
(MicroAP only).
Range: 1 - 3
Default: 1
MicroAP enables/disables
MicroAP operation
mode.
Range: Yes, No
Default: No
MicroAP AP_ID MAP MAC address. Default: <Auto>
MicroAP Beacon
Delay
frequency 'hops'
between broadcast
'beacon'
transmissions
(MicroAP and Symbol
protocol only).
Range: 1 - 10
Default: 10
MicroAP Hop
Sequence
frequency hopping
sequence selection
(MicroAP and Symbol
protocol only).
Range: 1 - 22,
<Auto> = auto-
select
Default: <Auto>