User's Manual

DOS/Windows For Workgroups Driver Installation
Spectrum24 Wireless LAN Adapter Product Reference Guide 55
A default installation is assumed for all driver installations.
All references made are to default directories for
all installations.
1. Power up the system to a DOS prompt.
2. Insert the Drivers and Utilities Installation Diskette into
the floppy drive.
3. Change the drive and path to the location of the
Drivers and Utilities diskette.
4. Press the Enter key.
5. Type
Install.
6. Follow the instructions from the installation program.
Reboot the system when prompted.
If the automatic installation program was not used, copy
the files as needed (LSL.COM, SLAINIT.EXE,
SL8ODIPC.COM) from the Drivers and Utilities Installation
diskette to the appropriate directory on the hard disk.
7.3 NDIS Manual Installation
For NDIS, MUs require the radio device driver
SL8NDIS.EXE. A protocol manager (e.g. PROTMAN) binds
NDIS drivers to the protocol stack. A network bind (e.g.
NETBIND) program binds all the network stack
components. NDIS loads as a system block device driver
NDIS drivers install in the CONFIG.SYS.
The NDIS driver supports network configurations
compatible with the NDIS v2.01 specification NDIS
configured systems require the following: