User's Manual

Windows 95/NT Driver Installations
46 Spectrum24 Wireless LAN Adapter Product Reference Guide
13. When Windows displays “Setup Needs To Copy Some
Windows NT files”. Enter the full path to the Windows
NT distribution files (i.e. A:\ for floppy based
installation), and click the Continue button.
14. Click the Bindings button to view the current protocol
stack bindings. Click the Enable/Disable buttons to
enable or disable the appropriate bindings.
15. Click the Close button to exit the Network settings.
16. If prompted to configure the bound protocol stacks
at this time, select the Symbol Spectrum24
WLAN Adapter from the Adapter list and enter
appropriate values.
17. The Network Settings Change dialog displays and
requests a system shutdown. Click the Yes button
to reboot.
18. Remove the Spectrum24 ISA/PC Windows 95/NT
Installation disk.
6.22.1 Windows NT 3.51
1. Boot and log into the system.
2. Open the Network applet from the Control Panel.
3. When the Network Settings dialog appears, click the
Add Adapter button.
4. When the Add Network Adapter dialog appears, click
<Other> Requires disk from manufacturer selection
and click the Continue button.
5. Insert the Spectrum24 ISA/PC Windows 95/NT
Installation diskette into the floppy drive and select
the default path to the driver files (A:\) by clicking the
OK button.
6. Select the Symbol Technologies Spectrum24 WLAN
Adapter and click the OK button.