User's Manual

Windows 95/NT Driver Installations
Spectrum24 Wireless LAN Adapter Product Reference Guide 41
3. The Network Settings dialog prompts for Windows NT
Networking installation, click the Yes button to
continue. When prompted, enter the full path to the
Windows NT distribution files (i.e. A:\ for floppy based
installation), and click the Continue button.
4. When the Network Adapter Card Detection dialog
appears, click the Do Not Detect button to manually
install the driver. Click the Continue button when the
next dialog appears.
5. At the bottom of the Add Network Adapter list box,
click <Other> Requires disk from manufacturer from
the Network Adapter Card list and click the Continue
button. Insert the Spectrum24 ISA/PC Windows 95/NT
Installation diskette into the floppy drive and select the
default path to the driver files (A:\) by clicking the OK
button.
6. When the Select OEM Option dialog appears, select
the Symbol Technologies Spectrum24 WLAN Adapter
option. Click the OK button to continue.
7. When the Symbol Technologies Spectrum24 NT
Installation dialog appears, set the appropriate driver/
adapter configuration parameters. For the Symbol
Spring protocol, change the Net Id to the Access Point
Net Id. For the IEEE 802.11 protocol, change the ESS
ID to the Access Point ESS ID. For the WPOS/ISA bus
card, select the WPOS/ISA Adapter Type. Click the OK
button when complete or the Cancel button to use
default values.
Interrupt Number, I/0 Port Address, and Memory Base
Address might need modification to fit the needs of the
system. Check the system resources for nonconflicting
settings before proceeding with the installation.