User's Manual

Spectrum24 Wireless LAN Adapter Product Reference Guide 21
Chapter 5 Firmware Update
Occasionally the Spectrum24 PC Card and ISA adapter
firmware require updating for new features or performance
improvements. Firmware updates require:
• DOS (Version 3.3 or higher) bootable disk
• Spectrum24 PC Card Installation Disk.
To update the firmware:
1. Boot the machine from a DOS-bootable disk.
2. Remove the DOS-bootable disk and insert the
Spectrum24 ISA/PC Card Installation Disk 1.
3. Change to the \FIRMWARE sub-directory.
4. Enter the command:
S_UPDATE (follow the instructions).
5. Remove the disk and restart the machine after
S_Update is complete.
If updating an ISA Plug and Play card, load SLAINIT.EXE
before running S_Update. Refer to the Plug and Play
section for SLAINIT.EXE installation. Symbol does not
support this Plug and Play ISA configuration yet under
Windows NT.
5.1 Verifying The Firmware Version
Load SLAINIT.EXE before installing ISA Plug and Play ISA
adapter. Refer to the Plug and Play section if necessary.
1. Boot the system to a DOS prompt.