User's Manual

Spectrum24 Wireless LAN Adapter User Guide iii
Regulatory Addendum
Congratulations on your purchase of this Symbol Technologies product. It is manufactured to the highest standards to
ensure trouble-free operation and durability. In order to comply with various U.S. and International regulatory requirements, we
have included this addendum with your product. It is an all-encompassing document that applies to the complete line of
Symbol products. Therefore, many of the labels shown, and statements indigenous to other devices may not apply to your
particular product.
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the Federal
Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements -
Canada
This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.
CE Marking and European Union Compliance
Products intended for sale within the European Union are marked with the CEMark which indicates compliance
to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are
included: Normes (EN), as follows.
Applicable Directives:
• Electromagnetic Compatibility Directive 89/336/EEC
• Low Voltage Directive 73/23/EEC
Applicable Standards:
• EN 55 022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information
technology Equipment
• EN 50 082-1 - Electromagnetic Compatibility - Generic Immunity Standard, Part 1: Residential, commercial,
Light Industry