User's Manual

Troubleshooting
Spectrum24 Wireless LAN Adapter Product Reference Guide H 3
• Check Service Monitor entries in the System Log
for hints on where to look for the conflicts (Windows
NT 4.0).
–Use the Windows NT Diagnostics program to
locate a free resource (Windows NT 4.0). Use the
Network Control Panel applet Configure option to
modify the appropriate key value.
Resource conflicts can exist without an entry in the event
log, when another adapter failed to register its resources.
When no event log entries appear and the Net_ID is
set appropriately, attempt different settings with the
Memory Base Address, Interrupt Number, and IO Port
Address parameters.
• No resource conflicts were detected, but the system
will not attach to the network.
– When using the Symbol protocol, verify the
Net_ID of the Spectrum24 card matches the
Net_ID of the Access Point. Use the Network
Control Panel applet Configure option to modify
the Net_ID setting.
– When using the IEEE 802.11 protocol, verify the
ESS_ID of the Spectrum24 card matches the
ESS_ID of the Access Point. Use the Network
Control Panel applet Configure option to modify
the ESS_ID setting.
– When using the IEEE 802.11 protocol, verify the
Mandatory BSS_ID setting of the Spectrum24 card
is set to 0 or matches the BSS_ID of the Access
Point. Use the Network Control Panel applet
Configure option to modify the Mandatory BSS_ID
setting.