User's Manual

Spectrum24 DOS Utilities
Spectrum24 Wireless LAN Adapter Product Reference Guide E 11
E.5.2 AP Table (MU Mode only)
The lower section is the AP table. The AP table contains the
AP status, BSS_ID, hop sequence, RSSI and MU load
information for all known APs.
Press PgUp and PgDn to display the second block of APs.
E.5.3 Associated MU Table (MicroAP Mode only)
The lower section is the associated MU table. The table
contains the MU status, the ID assigned by the MicroAP,
and transmit and receive statistics.
Rx Bcn
(MU mode only)
the total beacons received.
St the status byte. Sign bit indicates MU association
with the AP.
AG the AP table entry age-out counter. An age-out
counter of 0 through 8 maintains each AP table
entry. Value 8 indicates an AP acknowledgment
of an MU scan. A decreased value indicates
non-acknowledgment. The MU removes an AP
entry from the table when the age-out counter
value decrements to 0.
BSS_ID the last 3 hexadecimal fields of the AP MAC
address.
RS the AP RSSI value as measured by the MU.
#MU the MUs associated with the AP. The load
information helps the MU determine when to
roam. The number is always 0 (zero) if the MU
associates with a MicroAP.
Hp the hop sequence used by the AP.
Mode displays the MU power-operating mode.
Adrs the MU MAC address.