User's Manual

Spectrum24 DOS Utilities
Spectrum24 Wireless LAN Adapter Product Reference Guide E 5
To set the ESS_ID to Department 1, from the DOS
prompt, enter:
s_util E “Department 1”
To set the beacon algorithm to 11 with a minimum of 2
and a maximum of 10, from the DOS prompt, enter:
s_util T 11 2 10
The '2' and the '10' are optional.
To change the power mode to PSP, from the DOS prompt,
enter:
s_util P
E.4 S_INFO
S_INFO provides a dynamic, full screen display of selected
firmware statistics and configuration variables. It obtains
the data through the driver extension get_adapterinfo and
get_statistics functions, and it periodically refreshes the
display with updated information. This utility can identify if
the MU communicates properly.
At the DOS prompt, enter:
s_info