User's Manual

Spectrum24 DOS Utilities
Spectrum24 Wireless LAN Adapter Product Reference Guide E 3
I <all> displays association status, power
mode, beacon algorithm and
transmit status. This also displays
the ESS_ID, station ID and radio
type. The last line shows the APs
in the AP table and the number
of scans. The all option displays
additional transmit and receive
statistics. S_INFO also provides
this information.
J [hh hh hh hh hh hh] sets the mandatory AP BSS_ID
for the adapter to associate.
The BSS_ID represents the AP
MAC address.
L <value> get/set options that apply only to
Symbol radio terminals. The value
40 selects no power down in
Symbol terminals, and the value 20
automatically powers down the
terminals in a cradle.
O <option> sets the firmware option for
the adapter.
P sets the unit to PSP mode. The C
parameter sets it to CAM. (MU
mode only)
T <u> [v] [w] get/set beacon parameters. The u
parameter indicates the algorithm.
The v parameter indicates the
minimum beacon interval. The w
parameter indicates the maximum
beacon interval. (MU mode only)