User's Manual

Spectrum24 DOS Utilities
E 2 Spectrum24 Wireless LAN Adapter Product Reference Guide
E.2 S_UTIL
S_UTIL is a DOS-utility program that can configure the
adapter and obtain statistics. S_UTIL runs only after the
driver has been installed.
The program provides a list of available commands in the
absence of a command line parameter. Each command
requires a one-letter code to display current configuration
parameters or statistics. Some commands allow optional
parameters to change driver/firmware settings only for the
current session.
At the DOS prompt, enter:
s_util <func> [parms]:
where func and parms:
A displays LAN adapter configuration
including interrupt, I/O address,
memory address, ESS_ID, firmware
version, IEEE table number (country
code) and IEEE MAC address.
B displays the BSS_IDs of the
associated AP, preferred AP and
mandatory AP.
B [hh hh hh hh hh hh] sets the preferred AP BSS_ID for the
adapter to associate. The BSS_ID
represents the AP MAC address.
C sets the unit to CAM. The P
parameter sets it to PSP. (MU
mode only).
E <ESS_ID String> sets the 32-character ESS_ID for
the adapter.