User's Manual

Spectrum24 DOS Keywords
D 4 Spectrum24 Wireless LAN Adapter Product Reference Guide
Memory resource memory location (0xC000 to
0xE800). Default is 0xD000. Memory
mode uses the 32Kb block; I/O Mode
uses the 4Kb block. Verify the
designated memory block is reserved
using an extended memory manager
(e.g. EMM386.EXE with the 'x= option
for DOS). In protocol.ini, the keyword
Mem is also supported. This is a
hex number.
Tx_Rate set to 1 or 2 to enable operation at
1 Mbps or 2 Mbps. Use this keyword
multiple time to enable multiple data
rates. If the Adapter is not capable of
the requested data rate, the entry is
ignored. If this keyword is not entered,
the Adapter operates at all data rates it
can. If the Adapter is setup to be a MAP,
this entry means that the associating
MUs can optionally use this data rate.
Mode Add Mode to the file to set I/O mode. If
Mode is not in file, the PCMCIA
interface is set to memory mode
(default). I/O mode requires 16 bytes of
I/O space, 4Kb of attribute memory.
Memory mode requires 16 bytes of I/O
space, 32Kb of memory (4Kb attribute
or 32Kb common memory). In memory
mode the attribute and common
memory start at the same segment
address. Only 8-bit I/O is supported.
Keywords In
MicroAP Or
MU Mode
Description