User's Manual

Spectrum24 DOS Keywords
D 2 Spectrum24 Wireless LAN Adapter Product Reference Guide
Powermgmt sets power management option. The
default is 'No' for CAM. 'Yes' sets the
card to PSP mode.
Keywords For
MicroAP Mode
Only
Description
MicroAP enables Micro AP operation when
set to ‘Yes’. If enabled, the
PowerMgmt keyword is ignored and
the meaning of the Tx_Rate and
Ess_ID keywords change.
MicroAP_Hop_Set specifies the Hop Set used by the
Micro AP.
MicroAP_Hop_Seq specifies the Hop Sequence used by
the Micro AP.
MicroAP_BDelay specifies the delay for broadcast
packets being transmitted from
the MAP.
Base_Rate (MAP Only) set to 1 or 2 to require
associating MUs to operate at 1
Mbps or 2 Mbps. This keyword can
be used multiple time to require
multiple data rates. If the MU is not
capable of the required data rate(s),
it cannot associate with this MAP.
Keywords For
Power Saving Mode
Description