User's Manual

Windows NT/95 Utilities Setup
C 34 Spectrum24 Wireless LAN Adapter Product Reference Guide
Click the Set Net_ID (Spring Protocol) option button to
enter a new Net_ID for the Spectrum24 adapter in the
dialog box provided. Valid Net_IDs range from 0 to 255
decimal (0 to FF hex). Click Apply to set the Net_ID. The
feedback should be as follows:
ESSID the Extended Service Set Identifier.
Up to 32 characters. This parameter
displays only when using 802.11
protocol.
BSSID the IEEE MAC address of the AP
where the adapter is associated. This
parameter displays only when using
802.11 protocol.
Association ID displays the AP ID where the
Spectrum24 adapter associated.
Radio shows the radio version the
Spectrum24 adapter uses. Version 1
notes as X, version 2 through 4 note
as A.
AP Count the APs listed in the Spectrum24
AP table.
Full Scans full scans performed by the
Spectrum24 adapter.
Partial Scans partial scans performed by the
Spectrum24 adapter.
Request Accepted verifies the computer received the
new ID.
The Net ID has been
set to xxx (xxx).
states the present Net ID setting.