Integration Guide

Software Description
______________________________________________________________________________
WaveWorks PSS, Integration Guide, 1.10 Page 87
© 2000, Symbol Technologies, Inc. February 1, 2000
8.3.8 Debug Messages:
The following are messages logged in the End Of Trip method to track progress through that
method.
"EOT Done totals" - Completed calculation of trip totals
"EOT Done Rescan" - Completed Rescan calculation
"EOT Written to files" - Completed writing Pss Transfer File
"EOT Done" - End of trip completed successfully
8.3.9 Rescan Messages
These Information messages are specific to determine if a shopper gets rescanned or not.
"Into RescanLevel lOldLevel=%d, lPOSItemCount=%d,
lPSAItemCount=%d, lBothItemCount=%d,
lPOSItemValue=%d, IPSAItemValue=%d,
1BothItemValue=%d”
- Displays inputs into rescan calculation.
“Rescan by Currency” - Employs the rescan calculation by absolute value
difference in prices.
“IgnoreScanTooMuch” Ignore overscans by customer in rescan determination.
“NOT IgnoreScanTooMuch” - Do not ignore overscans by customer in rescan
determination.
“Level diff RescanLevel Diff=%d, levelMod=%d” - Displays the calculated difference and specified level
change.
“Rescan by Percentage” Employs the rescan calculation by percentage difference.
“new Level (%d) old(%d) modifier(%d)” - Displays the shoppers new and previous rescan levels,
and specified level change.
“Check new Level (%d) vs min(%d max(%d)” - Displays new level and minimum and maximum
allowed levels.
“Leave alone ret=%d” - No change in shopper”s level.
“Customer (%s) rescan is FALSE - Gold Customer”
ST_TEXT_RESCAN_GOLD
This customer will never be rescanned.
“Customer (%s) rescan is FALSE - Rescan Nobody, by
date”
ST_TEXT_RESCAN_NOBODYDATE
- During the current time period, nobody should be
rescanned. This is selected from the rescan screen on
the administrative service terminal.
“Customer (%s) rescan is FALSE - Rescan Nobody”
ST_TEXT_RESCAN_NOBODY
- Nobody is to be rescanned. This is selected from the
rescan screen on the administrative service terminal.
“Customer (%s) rescan is TRUE - Rescan Everybody,
by date”
ST_TEXT_RESCAN_EVERYBODYDATE
- During the current time period, everybody should be
rescanned. This is selected from the rescan screen on
the administrative service terminal.
“Customer (%s) rescan is TRUE - Rescan Everybody”
ST_TEXT_RESCAN_EVERYBODY
- Everybody should be rescanned. This is e- Nobody is
to be scanned. This is elected from the rescan screen on
the administrative service terminal.
“Customer (%s) rescan is TRUE - Always First Trip”
ST_TEXT_RESCAN_YESFIRSTTRIP
- This is the shopper”s first trip, rescan them.
“Customer (%s) rescan is FALSE - Never First Trip”
ST_TEXT_RESCAN_NOFIRSTTRIP
- This is the shopper”s first trip, do NOT rescan them.