User's Manual

Setup and Installation Guide 7
Entering Admin Mode
To enter into Admin mode:
1. Touch and hold the area in the bottom right of the Home page for five seconds to
activate the Admin pass code keypad.
Figure 5. Home Page
2. Touch the appropriate numbers on the keypad to enter the pass code, and press
to enter Admin mode.
Figure 6. Admin Home Page
3. To exit Admin mode, press .
NOTE The default pass code for Admin mode is 5678. The Admin pass code
for your configuration may have been revised. Consult your system
administrators for the correct pass code.
MN001103A01a.fm Page 7 Monday, March 23, 2015 2:50 PM