User's Manual

6 CONCIERGE CC5000-10
To mount the Concierge CC5000-10 using the appropriate mounting bracket:
1. The Concierge CC5000-10 mounting inserts are M4 x 10 mm. When selecting the
appropriate screw length, ensure its length safely engages the threads, but does
not penetrate the Concierge CC5000-10 bezel enclosure more than 0.39 in./10
mm.
Figure 4. Concierge CC5000-10 Mounting Dimensions
2. Align the mounting holes on the selected mounting bracket with the mounting
holes on the Concierge CC5000-10 bezel enclosure.
3. Insert, and tighten the screws through each of the four aligned mounting holes.
Getting Started
1. Mount the Concierge CC5000-10 as described in Mounting the Concierge
CC5000-10 on page 5.
2. Obtain a power cord (60320 C13 IEC) that is appropriate for your region and
amperage. Alternatively, this device supports Power-Over-Ethernet. See
Connecting to a LAN Network on page 8 for instructions.
3. Securely plug-in the C13 female end of the power cord into the C14 male end of the
power receptacle located in the back of the Concierge CC5000-10.
4. Plug-in the male end of the power cord to the wall socket.
5. The Concierge CC5000-10 software automatically boots to the Concierge Home
page (see Figure 5).
3.2 in (81 mm)
3.2 in (81 mm)
3.9 in (100 mm)
10.3 in (262 mm)
2.4 in (62 mm)
.5 in
(34 mm)
1.8 in (46 mm)
3.9 in (100 mm)
.08 in
(2 mm)
8.2 in (208 mm)
1.4 in
(36 mm)
1.3 in (34 mm)
MN001103A01a.fm Page 6 Monday, March 23, 2015 2:50 PM