User's Manual
Table Of Contents
- CB3000 Overview
- Installing the CB3000
- Prerequisite Requirements
- Verifying the Package Contents
- Verifying the Installation Site
- Installing the CB3000
- Displaying the CB3000 User Interface
- Connecting to the User Interface Using a Web Browser
- Connecting to the User Interface Using the Discovery Tool
- Configuring CB3000 WLAN Settings
- Configuring CB3000 Ethernet Settings
- Configuring CB3000 Security
- Configuring CB3000 Basic Encryption
- Testing Device Connectivity
- Where to Go From Here?
- CB3000 Troubleshooting
- Technical Specifications
- Customer Support
- Regulatory Compliance
4
1. Screw the antenna clockwise onto the antenna connector on the rear of the CB3000.
2. Attach one end of an Ethernet cable to a RJ-45 jack on a computer or hub.
3. Connect the other end of the Ethernet cable to the LAN connector on the rear of
the CB3000.
4. Plug the power adapter into the DC-IN connector on the rear of the CB3000.
5. Connect the plug end of the power adapter into a power outlet.
NOTE The back of the CB3000 also contains a Kensington lock mechanism for
attaching the CB3000 to an immovable objects in order to prevent theft.
NOTE Configure the PC for a static IP address of 10.10.1.10.
CAUTION Only use the power adapter supplied by Symbol with the CB3000.
Using an incorrect power adapter could damage the CB3000 and void
the product warranty.
!