User's Manual
Table Of Contents
- CB3000 Overview
- Installing the CB3000
- Prerequisite Requirements
- Verifying the Package Contents
- Verifying the Installation Site
- Installing the CB3000
- Displaying the CB3000 User Interface
- Connecting to the User Interface Using a Web Browser
- Connecting to the User Interface Using the Discovery Tool
- Configuring CB3000 WLAN Settings
- Configuring CB3000 Ethernet Settings
- Configuring CB3000 Security
- Configuring CB3000 Basic Encryption
- Testing Device Connectivity
- Where to Go From Here?
- CB3000 Troubleshooting
- Technical Specifications
- Customer Support
- Regulatory Compliance
16
Configuring CB3000 Ethernet Settings
Use the Ethernet Settings screen to specify the name of the CB3000 and assign network address
information required as part of the CB3000 basic configuration:
To configure required Ethernet settings for the CB3000:
1. Select Settings -> Ethernet Settings from the CB3000 menu tree.
2. Configure the Ethernet Settings screen to assign a device name and set network address
information the CB3000 uses to.
Device Name Specify a device name for the CB3000. Symbol recommends
selecting a name serving as a reminder of the user base the
CB3000 supports (engineering, retail etc.).
DHCP Select the Obtain an IP address automatically checkbox if the
CB3000 is using a DHCP server to obtain an IP address. Select the
Use the following IP Address checkbox if an IP address is to
entered manually (static) for the CB3000.