User's Manual
Table Of Contents
- CB3000 Overview
- Installing the CB3000
- Prerequisite Requirements
- Verifying the Package Contents
- Verifying the Installation Site
- Installing the CB3000
- Displaying the CB3000 User Interface
- Connecting to the User Interface Using a Web Browser
- Connecting to the User Interface Using the Discovery Tool
- Configuring CB3000 WLAN Settings
- Configuring CB3000 Ethernet Settings
- Configuring CB3000 Security
- Configuring CB3000 Basic Encryption
- Testing Device Connectivity
- Where to Go From Here?
- CB3000 Troubleshooting
- Technical Specifications
- Customer Support
- Regulatory Compliance
CB3000 Client Bridge Install Guide
9
Connecting to the User Interface Using the Discovery Tool
Use the Symbol Discovery Tool to locate and identify CB3000s. In addition, you can double-click a
located device within the Discovery Tool window to launch the Web interface.
After power-up, the CB3000 sends several DHCP packets requesting an IP address. If the CB3000
does not receive any replies within 20 seconds, it uses a default IP address of 10.10.1.1.
The Discovery Tool is available on the CB3000 product CDROM and from the Symbol support Website.
To launch and use the CB3000 Discovery Tool:
1. Insert the CB3000 Software and Documentation CDROM or download and launch the
CB3000 Software and Documentation image from the Symbol Web Site. Go to
(http://www.symbol.com/services/downloads
) to download the image.
2. Accept the terms Symbol Technologies Inc. End User License Agreement once the CB3000
flash menu displays.
NOTE The Discovery Tool works with Internet Explorer 4.0 and above and
Netscape 4.1 and above.