User's Manual

26 AR 400 Reader User’s Manual  2003-2004 Matrics, Inc.
4. To add a read point to the associated Reader port, enter the following information:
• A unique read point Name (one that does not already exist in the system),
• An optional Description to help identify the read point (for example, its location),
• The read point Class to associate with this read point, and
• The read point Zone to associate with this read point.
• Check Disable if you want to disable this read point from add and modify operations.
5. After typing the required information, click the Add ReadPoint button. If the data is valid, the read
point is added and the updated logical view of your Reader configuration displays.
NOTE: Your physical Reader configuration is not updated until you click
Commit [refer to the “Save or Discard Changes (or Revert to Backup)”
section in this manual for more information.] If not successful, the system
should indicate the problem and allow you to correct it by repeating the
operation.
6. To modify a read point, select it on the Reader Configuration page, and the Reader Configuration’s
Modify Read Point page displays. The fields on the Modify Read Point page auto-populate with the
selected read point’s settings.