User's Manual

AR 400 Reader User’s Manual  2003-2004 Matrics, Inc. 25
• To customize the Reader’s name and/or descriptive information, type a unique name (one that
does not already exist in the system) and/or description to help identify the Reader (for example,
its location), in the corresponding fields. Click Modify Reader when you are done to return to
the Reader Configuration page.
• A unique (factory defined) serial number is displayed in the Serial # field in the format “nnnn-
nnnn-nnnn-nnnn.”
• Check Disable Reader on the Reader Configuration’s Modify a Reader page if you want to
disable this Reader from add and modify operations. Click Modify Reader when you are done to
return to the Reader Configuration page.
Add, Modify, or Delete Read Points
When you add a read point to the logical view of your Reader, you add it to a Reader port.
1. If you haven’t already done so, launch and log in to the Reader Administrator Console.
2. Click the Configuration link on the left-hand side of any page. The Reader Configuration page
displays.
3. To add a single read point to a particular Reader port, click Add ReadPoint. The Reader
Configuration’s Add Read Point page displays.