User's Manual

22 AR 400 Reader User’s Manual  2003-2004 Matrics, Inc.
NOTE: Your physical Reader configuration is not updated until you click
Commit [refer to the “Save or Discard Changes (or Revert to Backup)”
section in this manual for more information.] If not successful, the system
should indicate the problem and allow you to correct it by repeating the
operation.
4. To modify a read point zone, select the zone’s name in the Zone List, and then click Select Zone.
The Zone Name field on the left-hand side of the Read Point Zone page auto-populates with the
selected zone’s name.
Change the selected zone’s name as needed, and then click Modify Zone.
5. To delete an unused read point zone, select the zone’s name in the Zone List, click Select Zone, and
then click the Delete Zone button. You cannot delete the default read point zone.
6. Commit or discard your changes (refer to the “Save or Discard Changes (or Revert to Backup)”
section in this manual for more information.)