User Manual
Table Of Contents
- Contents
- Section 1. Introduction
- Section 2. System Description
- Section 3. Specifications and Diagrams
- Section 4. Installing the Reader
- Section 5. Configuring the Reader
- Section 6. Notification of Events
- Section 7. Tag Selection Filters
- Section 8. Reader Server Controls
- Section 9. Ad-hoc Queries
- Section 10. Maintaining the Reader
- Access the Reader Maintenance Console
- Manage Communication Configuration Settings
- Manage System Time Settings
- Display Version Control Information and Load Firmware via FTP
- Display the System Log and/or Access History
- Shut Down and/or Restart the System, and Turn Off the HTTP Server
- Use Online Help
- Log Out of the System
- Section 11. Cautions, Notes, and Approvals
- Section 12. Warranties and Returns
- Section 13. Contact Us
- Appendix A. Error Messages and Resolutions
62 AR 400 Reader User’s Manual 2003-2004 Matrics, Inc.
4. Select either Restart or Shut down from the What do you want to do drop-down list, or select
Turn off HTTP Server if you want to shut down (disable) the Web interface.
CAUTION: If you choose to turn off the Web interface via the Turn off
HTTP Server command, you must physically re-connect via serial cable to
re-enable Web interface communication. It is not recommended that you use
Turn off HTTP Server unless you require the highest level of security and
understand the process for restart.
5. Click Go.
Use Online Help
The Reader Maintenance Console’s Help page provides easy online access to conceptual and procedural
information related to the Reader Maintenance Console.
1. To view Help for the Maintenance Console, click the Help link on the left-hand side of any page in
the Maintenance Console.
The Maintenance Console Help page displays in a separate window (refer to the “Use Online Help”
section provided previously in Section 3 of this User’s Manual for more information.)