User Manual Part 3
Table Of Contents
- Introduction
- 1.1 New Features
- 1.2 Feature Overview
- 1.2.1 Single or Dual Mode Radio Options
- 1.2.2 Separate LAN and WAN Ports
- 1.2.3 Multiple Mounting Options
- 1.2.4 Antenna Support for 2.4 GHz and 5.2 GHz Radios
- 1.2.5 Sixteen Configurable WLANs
- 1.2.6 Support for 4 BSSIDs per Radio
- 1.2.7 Quality of Service (QoS) Support
- 1.2.8 Industry Leading Data Security
- 1.2.9 VLAN Support
- 1.2.10 Multiple Management Accessibility Options
- 1.2.11 Updatable Firmware
- 1.2.12 Programmable SNMP v1/v2/v3 Trap Support
- 1.2.13 Power-over-Ethernet Support
- 1.2.14 MU-MU Transmission Disallow
- 1.2.15 Voice Prioritization
- 1.2.16 Support for CAM and PSP MUs
- 1.2.17 Statistical Displays
- 1.2.18 Transmit Power Control
- 1.2.19 Advanced Event Logging Capability
- 1.2.20 Configuration File Import/Export Functionality
- 1.2.21 Default Configuration Restoration
- 1.2.22 DHCP Support
- 1.2.23 Multi-Function LEDs
- 1.3 Theory of Operations
- Hardware Installation
- Getting Started
- System Configuration
- Network Management
- Configuring Access Point Security
- 6.1 Configuring Security Options
- 6.2 Setting Passwords
- 6.3 Enabling Authentication and Encryption Schemes
- 6.4 Configuring Kerberos Authentication
- 6.5 Configuring 802.1x EAP Authentication
- 6.6 Configuring WEP Encryption
- 6.7 Configuring KeyGuard Encryption
- 6.8 Configuring WPA Using TKIP
- 6.9 Configuring WPA2-CCMP (802.11i)
- 6.10 Configuring Firewall Settings
- 6.11 Configuring VPN Tunnels
- 6.12 Configuring Content Filtering Settings
- 6.13 Configuring Rogue AP Detection
- 6.14 Configuring User Authentication
- Monitoring Statistics
- Command Line Interface Reference
- Configuring Mesh Networking
- Technical Specifications
- Usage Scenarios
- Customer Support
- Index
AP-51xx Access Point Product Reference Guide8-104
AP51xx>admin(network.wireless.qos.create)>
Description:
Defines an access point QoS policy.
Syntax:
For information on configuring the WLAN QoS options available to the access point using the applet (GUI), see
Setting the WLAN Quality of Service (QoS) Policy on page 5-33.
show Displays QoS policy parameters.
set qos-name <index> Sets the QoS name for the specified index entry.
vop <index> Enables or disables support (by index) for legacy VOIP devices.
mcast <mac> Defines primary and secondary Multicast MAC address.
wmm-qos <index> Enables or disables the QoS policy index specified.
param-set <set-name> Defines the data type used with the qos policy and mesh network. When
set to a value other then manual, editing the access category values is
not necessary. Options include; 11g-default, 11b-default, 11g-wifi, 11b-
wifi, 11g-voice, 11b-voice or manual for advanced users).
cwmin <access
category>
<index> Defines Minimum Contention Window (CW-Min) for specified access
categoiry and index.
cwmax <access
category>
<index> Defines Maximum Contention Window (CW-Max) for specified access
categoiry and index.
aifsn <access
category>
<index> Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified access
categoiry and index.
txops <access
category>
<index> Configures Opportunity to Transmit Time (TXOPs Time) for specified
access categoiry and index.
default <index> Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
add-policy Completes the policy edit and exits the session.
.. Cancels the changes and exits.