User Manual Part 3

Monitoring Statistics
7-3
2. Refer to the Information field to reference the following access point WAN data:
Status The Status field displays Enabled if the WAN interface is enabled
on the WAN screen. If the WAN interface is disabled on the WAN
screen, the WAN Stats screen displays no connection information
and statistics. To enable the WAN connection, see Configuring
WAN Settings on page 5-14
HW Address The Media Access Control (MAC) address of the
access point
WAN port. The WAN port MAC address is hard coded at the factory
and cannot be changed.
IP Addresses The displayed Internet Protocol (IP) addresses for the
access point
WAN port.
Mask The Mask field displays the subnet mask number for the
access
point
’s WAN connection. This value is set on the WAN screen.
Refer to Configuring WAN Settings on page 5-14 to change the
subnet mask.
Link The Link field displays Up if the WAN connection is active
between the
access point and network, and Down if the WAN
connection is interrupted or lost. Use this information to assess the
current connection status of the WAN port.