User Manual Part 3

Configuring Access Point Security
6-41
AP2 Inbound SPI = 801
AP2 Outbound SPI = 800
4. Click Ok to return to the VPN screen. Click Apply to retain the settings made on the Manual
Key Settings screen.
5. Click Cancel to return to the VPN screen without retaining the changes made to the
Manual Key Settings screen.
6.11.2 Configuring Auto Key Settings
The access point’s Network Management System can automatically set encryption and
authentication keys for VPN access. Use the Auto Key Settings screen to specify the type of
encryption and authentication, without specifying the keys. To manually specify keys, cancel out of
the Auto Key Settings screen, select the Manual Key Exchange radio button, and set the keys
within the Manual Key Setting screen.
To configure auto key settings for the access point:
1. Select Network Configuration -> WAN -> VPN from the access point menu tree.
2. Refer to the VPN Tunnel Config field, select the Auto (IKE) Key Exchange radio button
and click the Auto Key Settings button.