User Manual Part 3

AP-51xx Access Point Product Reference Guide
6-28
1. Select Network Configuration -> Firewall -> Subnet Access from the access point
menu tree.
2. Refer to the Overview table to view rectangles representing subnet associations. The three
possible colors indicate the current access level, as defined, for each subnet association.
3. Configure the Rules field as required to allow or deny access to selected (enabled)
protocols.
Color Access Type Description
Green Full Access No protocol exceptions (rules) are specified. All traffic may
pass between these two areas.
Yellow Limited Access One or more protocol rules are specified. Specific protocols
are either enabled or disabled between these two areas.
Click the table cell of interest and look at the exceptions
area in the lower half of the screen to determine the
protocols that are either allowed or denied.
Red No Access All protocols are denied, without exception. No traffic will
pass between these two areas.