User Manual Part 3

System Configuration
4-17
4.4 Configuring SNMP Settings
Simple Network Management Protocol (SNMP) facilitates the exchange of management information
between network devices. SNMP uses Management Information Bases (MIBs) to manage the device
configuration and monitor Internet devices in potentially remote locations. MIB information accessed
via SNMP is defined by a set of managed objects called object identifiers (OIDs). An object identifier
(OID) is used to uniquely identify each object variable of a MIB. The access point Web download
package contains the following 2 MIB files:
• Symbol-CC-WS2000-MIB-2.0 (common Symbol MIB file)
• Symbol-AP-5131-MIB (AP-5131 specific MIB file)
If using the Symbol-CC-WS2000-MIB-2.0 and/or Symbol-AP-5131-MIB to configure the AP-5131, use
the table below to locate the MIB where the feature can be configured.
NOTE The Symbol-AP-5131-MIB contains the majority of the information
contained within the Symbol-CC-WS2000-MIB-2.0 file. This feature rich
information has been validated with the Symbol WS2000 and proven
reliable. The remaining portion of the Symbol-AP-5131-MIB contains
supplemental information unique to the access point feature set.
Feature MIB Feature MIB
LAN Configuration Symbol-AP-5131-MIB Subnet Configuration Symbol-CC-WS2000-MIB-2.0
VLAN Configuration Symbol-AP-5131-MIB DHCP Server
Configuration
Symbol-CC-WS2000-MIB-2.0
802.1x Port
Authentication
Symbol-AP-5131-MIB Advanced DHCP
Server configuration
Symbol-CC-WS2000-MIB-2.0
Ethernet Type Filter
Configuration
Symbol-AP-5131-MIB WAN IP Configuration Symbol-CC-WS2000-MIB-2.0
Wireless
Configuration
Symbol-AP-5131-MIB PPP Over Ethernet Symbol-CC-WS2000-MIB-2.0
Security Configuration Symbol-AP-5131-MIB NAT Address Mapping Symbol-CC-WS2000-MIB-2.0
MU ACL Configuration Symbol-AP-5131-MIB VPN Tunnel
Configuration
Symbol-CC-WS2000-MIB-2.0
QOS Configuration Symbol-AP-5131-MIB VPN Tunnel status Symbol-CC-WS2000-MIB-2.0