Manual
Table Of Contents
- Introduction
- Parts of the Series 3100 Terminal
- Power On and Off
- 31XX Cradles
- Replacing the Batteries
- Connecting the Modems
- Acoustic
- Connecting the Terminal to a Printer
- Using the Integrated Laser Scanner
- Connecting and Using a Tethered Scanner
- IEC825/EN60825 Class 1 Scanner
- Introduction
- Composants du terminal 3100
- Marche/arrêt
- Puits de chargement 31XX
- Remplacement des piles
- Raccordement des modems
- Raccordement du terminal à une imprimante
- Utilisation du lecteur laser intégré
- Branchement et utilisation d'un lecteur raccordé par câble
- Lecteur IEC825/EN60825 classe 1
- Einführung
- Teile des Terminals der Serie 3100
- Ein- und Ausschalten
- 31XX Cradle
- Austauschen der Batterien
- Anschließen des Terminals an einen Drucker
- Benutzen des integrierten Laserscanners
- Anschließen und Benutzen eines Handscanners
- IEC825/EN60825 SCANNER, KLASSE I
- Introduzione
- Componenti del terminale Serie 3100
- Accensione e spegnimento
- Cradle 31XX
- Sostituzione delle batterie
- Collegamento con modem
- Modem acustico
- Collegamento del terminale ad una stampante
- Uso del lettore laser integrato
- Collegamento ed uso di un lettore a filo
- Lettore Classe 1 IEC825/EN60825
- Introducción
- Componentes del terminal de la serie 3100
- Encendido y apagado
- Soportes 31XX
- Sustitución de las baterías
- Conexión de un módem
- Módem acústico
- Conexión del terminal a una impresora
- Empleo del scanner láser integrado
- Conexión y uso de un scanner independiente
- Scanner IEC825/EN60825 de clase 1
- Service Information
91
Radio Frequency Interference Requirements - U.S.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Radio Frequency Interference Requirements - Canada
This device complies with RSS 210 of Industry & Science Canada. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Marking and European Economic Area
(EEA)
RLAN's (2.4GHz) for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency
range 2.400 -2.4835 GHz
• France, equipment is restricted to 2.4465 -2.4835 GHz frequency range
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz
frequency range
• Italy requires a user license for outside usage.