Manual
Table Of Contents
- Introduction
- Parts of the Series 3100 Terminal
- Power On and Off
- 31XX Cradles
- Replacing the Batteries
- Connecting the Modems
- Acoustic
- Connecting the Terminal to a Printer
- Using the Integrated Laser Scanner
- Connecting and Using a Tethered Scanner
- IEC825/EN60825 Class 1 Scanner
- Introduction
- Composants du terminal 3100
- Marche/arrêt
- Puits de chargement 31XX
- Remplacement des piles
- Raccordement des modems
- Raccordement du terminal à une imprimante
- Utilisation du lecteur laser intégré
- Branchement et utilisation d'un lecteur raccordé par câble
- Lecteur IEC825/EN60825 classe 1
- Einführung
- Teile des Terminals der Serie 3100
- Ein- und Ausschalten
- 31XX Cradle
- Austauschen der Batterien
- Anschließen des Terminals an einen Drucker
- Benutzen des integrierten Laserscanners
- Anschließen und Benutzen eines Handscanners
- IEC825/EN60825 SCANNER, KLASSE I
- Introduzione
- Componenti del terminale Serie 3100
- Accensione e spegnimento
- Cradle 31XX
- Sostituzione delle batterie
- Collegamento con modem
- Modem acustico
- Collegamento del terminale ad una stampante
- Uso del lettore laser integrato
- Collegamento ed uso di un lettore a filo
- Lettore Classe 1 IEC825/EN60825
- Introducción
- Componentes del terminal de la serie 3100
- Encendido y apagado
- Soportes 31XX
- Sustitución de las baterías
- Conexión de un módem
- Módem acústico
- Conexión del terminal a una impresora
- Empleo del scanner láser integrado
- Conexión y uso de un scanner independiente
- Scanner IEC825/EN60825 de clase 1
- Service Information
Quick Reference
6
Power On and Off
Note: If the terminal is powered by a NiCd battery, charge the
battery fully before using the terminal.
To turn the terminal on or off, press
PWR.
Battery Charging and Communications
To charge the PDT 3100’s batteries or perform communications,
you have the option of using either a 31XX cradle or the 3115
Communications/Charger Adapter.
3115 Communications/Charger Adapter
The Series 3100 has an optional communications/charger
adapter (CCA) that facilitates communication with a host when
no cradle is available, and provides power to the terminal from
a wall-mounted power supply for battery charging during
terminal use and flash EPROM programming.
Battery Charging
To provide power directly to a terminal for charging the
NiCd battery:
1. Plug the 10-pin RJ41 connector into the base of the Series
3100 terminal.
2. Plug the connector from the 15V power supply,
P/N 55915-00-00 (US, 115V) or 60507-00-00 (International,
230V) into the power input jack (J1) on the CCA.