Manual
Table Of Contents
- Introduction
- Parts of the Series 3100 Terminal
- Power On and Off
- 31XX Cradles
- Replacing the Batteries
- Connecting the Modems
- Acoustic
- Connecting the Terminal to a Printer
- Using the Integrated Laser Scanner
- Connecting and Using a Tethered Scanner
- IEC825/EN60825 Class 1 Scanner
- Introduction
- Composants du terminal 3100
- Marche/arrêt
- Puits de chargement 31XX
- Remplacement des piles
- Raccordement des modems
- Raccordement du terminal à une imprimante
- Utilisation du lecteur laser intégré
- Branchement et utilisation d'un lecteur raccordé par câble
- Lecteur IEC825/EN60825 classe 1
- Einführung
- Teile des Terminals der Serie 3100
- Ein- und Ausschalten
- 31XX Cradle
- Austauschen der Batterien
- Anschließen des Terminals an einen Drucker
- Benutzen des integrierten Laserscanners
- Anschließen und Benutzen eines Handscanners
- IEC825/EN60825 SCANNER, KLASSE I
- Introduzione
- Componenti del terminale Serie 3100
- Accensione e spegnimento
- Cradle 31XX
- Sostituzione delle batterie
- Collegamento con modem
- Modem acustico
- Collegamento del terminale ad una stampante
- Uso del lettore laser integrato
- Collegamento ed uso di un lettore a filo
- Lettore Classe 1 IEC825/EN60825
- Introducción
- Componentes del terminal de la serie 3100
- Encendido y apagado
- Soportes 31XX
- Sustitución de las baterías
- Conexión de un módem
- Módem acústico
- Conexión del terminal a una impresora
- Empleo del scanner láser integrado
- Conexión y uso de un scanner independiente
- Scanner IEC825/EN60825 de clase 1
- Service Information
17
Using the Integrated Laser Scanner
The integrated scanner has a unique trigger that the operator
can configure. To select the trigger and use the integrated laser
scanner:
1. Power on the system and scanner by pressing
PWR or the
scanner trigger.
2. Lift and turn the scanner to the direction you wish to scan.
The scanner turns toward the back of the terminal.
3. Press the
FUNC key and the trigger you are most
comfortable using (see the figure below). This selects the
scanner trigger. The other trigger defaults to an ALPHA
shift key on the 35-key terminal.