Barcode Reader User Manual

explorer polls the storage array using the polling interval—for example, a polling

interval of 180 minutes.

Change detection is available for the following storage arrays:

■ EMC CLARiiON

■ EMC Symmetrix

■ Hitachi HiCommand

■ HP EVA

■ NetApp unified storage devices

For information about enabling change detection, see the CommandCentral

Hardware and Software Configuration Guide.

Improved Data Module file scanning

In CommandCentral Storage 5.0 MP1, the Data Module file scanner determines a

file’s size by its logical size. Now, in CommandCentral Storage 5.1, the file scanner

also collects a file’s physical size. A file’s physical size provides you with a more

accurate account of space consumption over the logical size. You can use the Data

Module Importer settings and Data Module rules to specify whether you want

summary reports that report on directory size, user consumption, file type usage,

and aging data to display a file’s size by its logical size or physical size.

Additionally, you can drill down into detail reports to display both the logical size

and physical size.

For more information, see the CommandCentral Administrator’s Guide.

Discovery of device groups and composite groups for EMC Symmetrix

storage arrays

CommandCentral Storage now discovers the name of the device groups and

composite groups to which devices from EMC Symmetrix storage arrays belong.

The group names appear when you view an EMC Symmetrix storage array’s Devices

pane.

Discovery of replication objects for HP EVA storage arrays

CommandCentral Storage now discovers the following replication objects for HP

EVA storage arrays:

■ Snapshots

■ Vsnaps

■ Snapclones

Getting started with the CommandCentral family

About Veritas CommandCentral Storage