8.0

Norton PartitionMagic 17
2
Click BootMagic from the Norton PartitionMagic setup
screen, then click Install to launch the BootMagic installation
program.
3 Follow the on-screen instructions to install BootMagic.
IMPORTANT! BootMagic can be installed to any FAT or
FAT32 partition (primary or logical). If your
system only has NTFS partitions, see
“Installing BootMagic on an NTFS System” in
the Norton PartitionMagic user guide.
4 After installation is complete, click Back > Exit to close the
setup screen.
After installation, BootMagic sorts through your system’s hard
disks, looking at the partition tables and gathering information
about each currently installed operating system. BootMagic then
automatically runs the configuration program, adding every
detected OS to the BootMagic Menu.
At this point, it may be necessary for you to edit the items that
appear in the menu list. While BootMagic reliably detects most
operating systems, it may also detect some non-OS partitions. For
example, if you have a primary NTFS data partition (that is, a
partition which contains only data, no OS) on the first disk,
BootMagic may detect it as Windows NT. Likewise, a primary FAT
or FAT32 data partition may be detected as MS-DOS or Windows
95/98. Because data partitions cannot be booted, you should
remove them from the menu list. You can also choose to add or
remove other OS selections, modify OS names and icons for easier
identification, add passwords, set a new startup delay, or select a
different default OS.