Product manual

The default trust level of the devices that you add to
the Network Security Map is Protected. However, you
can change the trust level of the devices.
w
If you trust a device that is not on your network, you
can expose your computer to potential security risks.
To add a device to the Network Security Map
1
In the Norton Internet Security main window, click
Advanced.
2
Under Network Protection, click Network Security
Map.
3
On the left side of the Network Security Map
window, under Total in Network, click the plus
symbol.
4
In the Add a Device window, in the Name box, type
the name of the device that you want to add to the
Network Security Map.
The maximum character length of the device name
is 15 characters.
5
In the IP or Physical Address box, type the IP
address or physical address of the device that you
want to add to the Network Security Map.
You can use the following formats in the IP or
Physical Address box:
172.16.0.0IPv4 address
fe80::12ac:fe44:192a:14ccIPv6 address
11-22-c3-5a-fe-a4Physical address
ftp.myfiles.comResolvable host
The address that you provide is not verified until
the device is physically found on the network.
6
Click Add Device.
Protecting Internet activities
About the Network Security Map
312