User manual
Table Of Contents
- Contents
- 1. Welcome to Norton Core
- 2. Set up your protected network
- 3. Customize your Norton Core settings
- Change your Norton Core network name and password
- Change Norton Core network band settings
- Create your Norton Core guest network
- Enable or disable Norton Core UPnP
- Add or update Norton Core port forwarding settings
- Change Norton Core DNS settings
- Set the Norton Core light brightness and understand light states
- Change Norton Core time zone settings
- Push Norton Core notifications to Android or iOS devices
- 4. Additional solutions
- Find Norton Core version details
- Set up with a replacement Norton Core router
- Norton Core software and firmware updates
- Reset Norton Core to factory settings
- Restart your Norton Core router
- Devices in your Norton Core network
- Submit Norton Core error logs to Symantec
- Send your feedback to Norton Core team
- Norton Core support
- Disclaimers
Norton Core Secure WiFi Router specifications
Processor, storage, memory
■ Qualcomm 1.7 GHz Dual Core
■ 1 GB DDR3 SDRAM
■ 4 GB eMMC Flash
Wireless connectivity
■ Simultaneous dual-band 2.4 GHz & 5 GHz WiFi radios
■ AC2600 (800 Mbps @ 2.4 GHz + 1733 Mbps @ 5 GHz)
■ 4x4 MU-MIMO, IEEE 802.11a/b/g/n/ac Wave 2
■ Bluetooth Low Energy (BLE)
Security and networking
■ DPI, IDS, IPS, WPA2, DHCP, NAT, UPnP
■ Automatic device discovery
Note: Norton Core currently does not support IPv6 protocol.
Wired connectivity
■ 1 x Gigabit WAN port (cable or DSL modem)
■ 3 x Gigabit LAN ports (networked devices)
■ 2 x USB 3.0 ports (printer)
Power
■ Output: 36 W (12 VDC - 3 A)
■ Input: 110 VAC
7Welcome to Norton Core
System requirements and specifications