User manual
Table Of Contents
- Contents
- 1. Welcome to Norton Core
- 2. Set up your protected network
- 3. Customize your Norton Core settings
- Change your Norton Core network name and password
- Change Norton Core network band settings
- Create your Norton Core guest network
- Enable or disable Norton Core UPnP
- Add or update Norton Core port forwarding settings
- Change Norton Core DNS settings
- Set the Norton Core light brightness and understand light states
- Change Norton Core time zone settings
- Push Norton Core notifications to Android or iOS devices
- 4. Additional solutions
- Find Norton Core version details
- Set up with a replacement Norton Core router
- Norton Core software and firmware updates
- Reset Norton Core to factory settings
- Restart your Norton Core router
- Devices in your Norton Core network
- Submit Norton Core error logs to Symantec
- Send your feedback to Norton Core team
- Norton Core support
- Disclaimers
If you choose Neustar Advantage DNS, Norton Core uses the IP addresses 156.154.70.1
and 156.154.71.1 as your DNS servers and performs all DNS lookups using Advantage
DNS.
5
On the top-right corner, tap Save.
The Norton Core router will restart for the DNS changes to take effect.
Note: *Symantec does not endorse Neustar Advantage, Google DNS or any other DNS web
protection solution in the market.
Set the Norton Core light brightness and understand
light states
The Norton Core light indicates the current status of your router and protected network. It can
help you diagnose or isolate connectivity problems. Norton Core shows two light colors, amber
and white.
Light statuses
■ No light
Norton Core router is not powered on or light is turned off. Check if the AC adapter is
plugged in.
Check Settings in the Norton Core app to see if the light brightness is set to Off.
■ Blinking white
Norton Core router is trying to establish an internet connection.
■ Solid white
Norton Core is connected to the internet and broadcasting WiFi.
■ Blinking/solid amber
Norton Core is not connected to the internet. An error or problem in connection.
Norton Core lets you adjust the light brightness.
Adjust the light brightness
1
Launch the Norton Core app.
2
On the top-left corner, tap the menu icon.
3
Tap Settings > Router > Light Ring Brightness.
4
In the Light Ring Brightness screen, under Brightness Level, select one of the following:
■ High
■ Low
38Customize your Norton Core settings
Set the Norton Core light brightness and understand light states