User manual
Table Of Contents
- Contents
- 1. Welcome to Norton Core
- 2. Set up your protected network
- 3. Customize your Norton Core settings
- Change your Norton Core network name and password
- Change Norton Core network band settings
- Create your Norton Core guest network
- Enable or disable Norton Core UPnP
- Add or update Norton Core port forwarding settings
- Change Norton Core DNS settings
- Set the Norton Core light brightness and understand light states
- Change Norton Core time zone settings
- Push Norton Core notifications to Android or iOS devices
- 4. Additional solutions
- Find Norton Core version details
- Set up with a replacement Norton Core router
- Norton Core software and firmware updates
- Reset Norton Core to factory settings
- Restart your Norton Core router
- Devices in your Norton Core network
- Submit Norton Core error logs to Symantec
- Send your feedback to Norton Core team
- Norton Core support
- Disclaimers
■ - Has mobile data plan (for internet connection)
If yes, you can proceed to download the Norton Core app.
To set up Norton Core with a PPPoE connection, you need:
■ A broadband internet connection
■ A modem or a modem and router combo device configured in bridge mode
■ A valid Norton account
■ Norton Core app installed on your iOS or Android device
■ The user name and password provided by your ISP
Set up Norton Core
1
Unbox the package you received.
Contents in the box include:
■ Norton Core Secure WiFi Router
■ Ethernet cable
■ AC power adapter
■ Quick Start Guide
2
Choose a location near your broadband connection and place the Norton Core router on
an open shelf, table, or TV stand. For the best wireless signal, make sure that there are
no obstructions where you place the Norton Core router.
Note: If you find any physical damage to the device or any of the components, contact
Norton Support for a replacement.
3
Turn on Bluetooth on your mobile device.
The Norton Core router uses Bluetooth (BLE) to connect with the Norton Core app during
setup.
4
Launch the Norton Core app.
5
Tap Set Up Norton Core.
6
Read the license agreement, and tap Agree & Launch.
7
Tap Next.
8
In the Select your current wireless set up screen, select your current broadband set
up.
■ If you have separate modem and router devices, select this icon:
19Set up your protected network
Set up your Norton Core with PPPoE connection