Product manual

To exclude attack signatures from being monitored
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under Detailed Settings,
click Firewall.
3
On the Intrusion and BrowserProtection tab, under
Intrusion Prevention, in the Intrusion Signatures
row, click Configure.
4
In the Intrusion Signatures window, uncheck the
attack signatures that you want to exclude.
5
Click OK.
To include the attack signatures that were previously
excluded
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under Detailed Settings,
click Firewall.
3
On the Intrusion and BrowserProtection tab, under
Intrusion Prevention, in the Intrusion Signatures
row, click Configure.
4
In the Intrusion Signatures window, check the
attack signatures that you want to include.
5
Click OK.
Turning off or turning on AutoBlock
When an attack is detected from a computer, the attack
is automatically blocked to ensure that your computer
is safe. If a different attack signature is detected from
the same computer, Norton 360 activates AutoBlock.
The AutoBlock feature blocks all traffic between your
computer and the attacking computer for a specific
time period. During this period, AutoBlock also blocks
the traffic that does not match an attack signature.
w
You can specify the period for which you want Norton
360 to block the connections from attacking computers.
By default Norton 360 blocks all traffic between your
computer and the attacking computer for a period of
30 minutes.
263Keeping secure on the Internet
About Intrusion Prevention