Product manual

5
In the Network Security Map window, do one of
the following:
1 To edit the trust level of a device that is on your
network, in the network map, click the device.
1 To edit the trust level of a device that you
manually added, in the Network Details
drop-down list, click Trust Control, and then
click the device.
6
In the device details section, in the Trust Level row,
click Edit.
7
In the Edit Device Trust Level window, click FULL
TRUST.
8
At the bottom of the Edit Device Trust Level
window, check Exclude from IPS scanning.
9
In the Exclude from IPS Scanning dialog box, click
Yes to confirm.
10
Click OK.
Removing devices from the Network Security Map
The Network Security Map window lists the devices
that are connected to your network. You can remove a
device or a computer from the Network Security Map.
You can purge all devices from the network map and
create a new list of devices. For example, you can purge
all the devices that were present in your previous
network before you connect to a new network. Ensure
that you disable Remote Monitoring before you purge
the network map. Norton 360 cannot purge the network
map when the Remote Monitoring is turned on. Also,
ensure that you close the Network Security Map
window before you purge the network map. You cannot
purge the network map when the Network Security
Map window is open.
w
Norton 360 purges the devices that you add manually
in the Trust Control network depending upon their
trust level. It does not purge the devices that have a
trust level as Full Trust or Restricted.
Protecting your home network
About the Network Security Map
420