Product manual

6
In the IP or Physical Address box, type the IP
address or physical address of the device that you
want to add to the Network Security Map.
You can use the following formats in the IP or
Physical Address box:
172.16.0.0IPv4 address
fe80::12ac:fe44:192a:14ccIPv6 address
11-22-c3-5a-fe-a4Physical address
ftp.myfiles.comResolvable host
The address that you provide is not verified until
the device is physically found on the network.
7
Click Add Device.
Finding a computer's IP address
You can find a computer's IP address in various ways.
On Windows 2000/XP, Windows Vista, Windows 7, and
Windows 8 computers, you can use the ipconfig
command to find the IP address of a computer.
The ipconfig command reports the IP address of its
local computer only. You must run this program on the
computer that you want to identify.
To find the IP address by using ipconfig on Windows
2000/XP
1
On the computer you want to identify, on the
Windows taskbar, click Start > Run.
2
In the Run dialog box, type cmd.
3
Click OK.
4
At the command prompt, type ipconfig, and then
press Enter.
5
Write down the IP address.
Protecting your home network
About the Network Security Map
410