Product manual

w
Ensure that the computers that you want to remotely
monitor have a version of a Norton product that
supports Remote Monitoring.
Norton 360 requires a Passkey to set up Remote
Monitoring. You must type the same Passkey for all
the computers that you want to remotely monitor.
After you set up Remote Monitoring, you can connect
any computer to your network and enter the same
Passkey. Norton 360 automatically identifies the
computer and connects it to the Network Security Map.
To set up Remote Monitoring
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under Detailed Settings,
click My Network.
3
In the Network Security Map row, click Configure.
4
On the left side of the Network Security Map
window, under Remote Monitoring, click Setup.
5
In the Remote Monitoring Setup window, type a
Passkey.
The Passkey should be between 6 and 20 characters
in length. The Passkey is case sensitive.
6
Under Choose the default mode for Computer
Discovery, select one of the following options:
Lets your computer always
discover other computers that
are connected to the network
Computer Discovery
always on
Lets your computer discover
other computers that are
connected to the network when
the Network Security Map
window is open
Computer Discovery on
only when Network
Security Map screen is
displayed
7
Click OK.
8
Set up Remote Monitoring for all other computers
that you want to monitor remotely.
407Protecting your home network
About the Network Security Map