Product manual

w
Norton 360 requires you to configure the Symantec
Security Driver to open the Network Security Map. You
cannot install the Symantec Security Driver when you
run LiveUpdate. You can either allow the Norton
LiveUpdate to complete or close the Norton LiveUpdate
session before you install the Symantec Security Driver.
To view devices on the Network Security Map
1
In the Norton 360 main window, click Settings.
2
In the Settings window, under Detailed Settings,
click My Network.
3
In the Network Security Map row, click Configure.
4
If the Product Configuration panel appears, click
Continue.
The Product Configuration panel appears when
you click Network Security Map for the first time.
The Product Configuration panel helps you install
Symantec Security Driver that is required to view
the Network Security Map window. The process of
installation of the Symantec Security Driver
disrupts your network connection temporarily.
5
The Network Security Overview window lets you
view the summary of features of the Network
Security Map. The Network Security Overview
window appears in the following instances:
1 When you open the Network Security Map
window for the first time.
1 When you turn on Welcome Screen at Startup
in the Settings window.
6
If the NetworkSecurityOverview window appears,
click OK.
If you do not want to view the Network Security
Overview window in the future, check Do not show
this again before you click OK.
7
In the Network Details drop-down list, select the
network that lists the device for which you want to
see the details.
401Protecting your home network
About the Network Security Map