Product manual

3
On the Intrusion and Browser Protection tab, in
the Browser Protection row, do one of the following:
1 To turn off Browser Protection, move the On/Off
switch to the right to the Off position.
1 To turn on Browser Protection, move the On/Off
switch to the left to the On position.
4
Click Apply.
5
If you turned off Browser Protection, in the
Protection Alert dialog box, in the Select the
duration drop-down list, select how long you want
to turn off Browser Protection.
6
Click OK.
About Intrusion Prevention exclusion list
The Intrusion Prevention System in Norton 360 scans
all the network traffic that enters and exits your
computer. When a device on your network requests
access to your computer, Intrusion Prevention scans
this request to ensure that it is not a virus attack. If
the information matches an attack signature, Intrusion
Prevention blocks the traffic from the suspicious device
and protects your computer. Scanning every request
from all the devices that access your computer
increases the scan time which slows down the network
speed of your computer.
If you are sure that a device on your network is safe,
you can change the trust level of the device to Full
Trust. You can configure the trust level of a device
using the Network Security Map. You can exclude these
trusted devices from Intrusion Prevention scan.
Excluding Full Trust devices from the Intrusion
Prevention scan saves the scan time and improves the
network speed of your computer. When you exclude a
device that is set to Full Trust, Norton 360 does not
scan any information that is received from this device.
The Full Trust devices that are excluded from Intrusion
Prevention scan are added to Intrusion Prevention
exclusion list.
291Keeping secure on the Internet
About Intrusion Prevention