Product manual

5
In the New Scan window, in the Scan Name box,
type a name for the scan.
You cannot specify a scan name that is already in
use.
6
On the Scan Items tab, add the items that you want
to scan. See “Selecting the scan items” on page 174.
7
On the Scan Schedule tab, set the frequency and
time at which you want to perform the scan. See
“Scheduling a scan” on page 178.
8
On the Scan Options tab, configure the scan options
as required. See “Configuring the scan options”
on page 175.
9
Click Save.
Selecting the scan items
When you configure a custom scan, you must select
the items that you want to include in the scan. You can
include individual files, folders, or drives. You can
include multiple drives, folders, and files to add to the
scan. You can also exclude items from the scan.
w
When you select a drive, all the items in the drive
including the files and folders are automatically added
to the scan. When you select a folder, all of the files in
folder are added to the scan.
To select the scan items
1
In the Norton 360 main window, click Security, and
then click Run Scans.
2
In the Scans window, under Computer Scans, click
Custom Scan.
3
Click Go.
4
In the Scans window, do one of the following:
1 To add items for a new scan, click Create Scan.
You must provide a name for the scan in the
Scan Name box.
1 To add items for an existing scan, in the Edit
Scan column, click the edit icon for the scan that
you want to modify.
Scanning your computer
About Computer Scan
174